Post by Jem on Feb 22, 2010 18:03:01 GMT 1
BODYLIFT KIT....
wd40 the 10 body mounts the day before fitting and the day off doing the lift ....
2 rear behind bumper
2 front behind bumper
6 chassis out riggers
remove front bumper + radiator top mounts
slacken steering u/j
undo all 10 nuts and leave bolts in place ...
undo the 4 seatbelt tie bars from chassis end then remove the pins leaving the mount plates attached....
jack up 1 side on the sill us length off 3x2 to spread the weight....remove the 5 bolts on this side and jack until you can side the spacers in place .. put the 5 new bolts and start the new nuts (dont tighten them yet)
repeat on the other side but then tighten all 10 bolts up ..
tighten the steering back up and you will need to redrill the radiator top mounts (8mm drill)...
remount the front bumper ..
wd40 the 10 body mounts the day before fitting and the day off doing the lift ....
2 rear behind bumper
2 front behind bumper
6 chassis out riggers
remove front bumper + radiator top mounts
slacken steering u/j
undo all 10 nuts and leave bolts in place ...
undo the 4 seatbelt tie bars from chassis end then remove the pins leaving the mount plates attached....
jack up 1 side on the sill us length off 3x2 to spread the weight....remove the 5 bolts on this side and jack until you can side the spacers in place .. put the 5 new bolts and start the new nuts (dont tighten them yet)
repeat on the other side but then tighten all 10 bolts up ..
tighten the steering back up and you will need to redrill the radiator top mounts (8mm drill)...
remount the front bumper ..
yea boii